Load standard-size paper
●
Load envelopes
●
Load cards and photo paper
Load standard-size paper
To load standard paper:
1.
Pull out main input tray.
2.
Slide the paper-width guides out as far as possible.
3.
Insert the paper print-side down in the center of the tray.
Make sure the stack of paper is inserted as far inside the printer as possible and does not
exceed the higher line marking in the tray. For more help, refer to the diagram engraved in the
tray.
NOTE: Do not load paper while the printer is printing.
ENWW
Load paper 23
4.
Slide the paper-width guides in the tray until they touch the edge of the stack of paper, and then
reinsert the tray.
NOTE: To load legal-size paper, press the blue latch at the bottom left of the input tray and
fully extend the tray.
5.
Pull out the output tray extension until the intended paper size is reached.
NOTE: If you have a second tray, see Install and use second tray (Tray 2) on page 30 for how to
load paper.